Hotel Furniture Installation Design

The following 6 points should be considered in the material structure design of hotel furniture. When designing the material structure of the guest room furniture of the hotel furniture, you can focus on the following aspects:
Appearance quality
The appearance quality of hotel furniture first requires that the furniture tabletop is flat, the workmanship is fine, the decoration is delicate, and the texture is clear and beautiful. Guest room furniture usually uses particleboard, medium-density fiberboard, blockboard, laminate, etc. as the base material, and uses veneer, wood veneer, and plywood as the covering material. Different base materials and covering materials have different material properties. Failure to pay attention to the characteristics of the materials and the correct use methods often leads to warping of the board. The structural characteristics of the covering materials on the back and front of the board must be the same or similar. The moisture content of the base material is generally required to be 6~10%, and the materials selected should be from the same batch as much as possible. In the workshop processing, try to shorten the time of loading and pressing. Different material properties, different moisture content of covering materials, pay attention to different glue coating thickness, pressing time and pressure.
Structural strength
Guest room furniture is mostly fixed furniture, and the general structural board type is mainly used. Wood screws, hardware connectors and adhesives are used as the jointing methods. When using materials, attention should be paid to different material properties. For example, particle board and medium-density fiberboard have poor nail holding force. Avoid using them in parts that require frequent activities or strong nail holding force, such as door hinge screw parts and drawer rail bottom rail screw parts, which are easy to loosen and produce noise. Special attention should be paid to the hardware hanging parts on the bed screen and mirror frame wall, or wood should be used instead for reinforcement. Nowadays, the 45-degree inverted wooden square structure is popular.
Material cost
Try to use low-cost materials as much as possible when meeting the use requirements. When using large-block surface materials, pay attention to the use of small-block materials of the same type to comprehensively improve the utilization rate of the board. Guest room furniture is generally large in quantity. Try to use computers to arrange materials reasonably, and use large and small blocks of materials in a comprehensive manner to reduce material costs. For different structures, pay attention to the comparison of material costs.
Efficient production
Under the same material cost, which material is easy to process, which process can save process cost and improve efficiency, especially in vertical milling, engraving and carving processes, which material is easy to process and cut, and easy to be smooth and tidy.
Transportation and installation
Hotel floors are generally high, and furniture is required to be light and easy to transport. In particular, some one-piece bed backs and some extended desks cannot be transported by elevators. Freight elevators are generally removed when furniture is installed. How to transport safely requires special consideration from the weight and structure of materials.
Safety performance
Generally, hotels do not have clear regulations on the amount of free formaldehyde, but there are furniture fire prevention requirements. If the hotel allows, fireproof boards, anti-scalding paints, flame-retardant fabrics, etc. can be used in certain parts. High-end hotels even require that the wood used to make furniture be fire-proofed.
The above factors need to be comprehensively considered and cross-applied in actual applications. The functional requirements and modeling details of hotel furniture have an interactive relationship with the reasonable material structure and workshop process arrangement of Diou Hotel Furniture Company. It is recommended to try to make the guest room furniture produced meet the hotel requirements, and be efficient in production and reduce costs. Use professional processing technology and processing equipment to make the produced furniture meet the people-oriented comfort requirements of high-end hotels.